skip to: page content | links on this page | site navigation | footer (site information)

Privacy Policy / Terms of Use



  • Guide Number 20 (ISO100-m)
  • Flash Control Function: Flash Auto (F2.8, F4, F5.6)
    Power Ratio : 5steps in manual mode
  • The connecting cord is not necessary by wireless synchronization.
    The Slave Sensor senses and synchronizes with light reflected from the subject, but this flash will not synchronize in places where reflected light is weak.
  • Compatible with Pre-flash cancellation of digital camera
    with some types of digital cameras, the exposure is adjusted with first pre-flash and the picture is taken with the second flash. The Pre-flash cancellation doesn't fire with the first pre-flash, but synchronize with second flash.
  • Easy to install on camera by the attached bracket. When pulling up the built-in panel, the flash is applicable to wide-angle lens.
Guide Number 20(ISO•100-m)
Recycling Times *Full flashing Alkaline batterie : 2-AAA approx. 9 sec.
Alkaline batterie : Approx. 70
No. of flashes *Full flashing NiCad Battery : 2-AAA approx. 5 sec.(Ni-MH)
NiCad Battery : Approx. 120(Ni-MH)
Flash Control Mode Flash Auto, Power Ratio
Auto Effective Range
(Focal Length at 35mm)		 F2.8 1.5-7m
F4 1-5m
F5.6 1-3.5m
(Focal Length at 35mm)
Power Ratio FULL,1/4,1/8,1/16,1/32
Angle of Coverage Angle of coverage for more than 24mm with built-in wide panel.
Flash Speed Approx. 1/2,000-1/30,000 sec.
Wireless Function Pre-flash cancellation
Dimensions(H x W x D) Approx. 58x78x29mm/2.3x3.1x1.2in
(w/o Shoe)
Weight Approx. 100g/3.6oz
(w/o Battery)